(9) Fit the cross pin into the spool/sleeve. 7405S STVLV46(1) (10) Fit bearing races and needle bearing as shown on below drawing. 7405S STVLV46(2) 1 Outer bearing race 2 Needle bearing 3 Inner bearing race 4 Spool 5 Sleeve 1 3 2 * Inside chamfer on inner bearing race must face inner spool. 4 5 7405S STVLV46(3) (11) Grease O-ring and kin-ring with hydraulic oil and place them on the tool. See next page. 7405S STVLV46(4) 5-30