MACHINE OPERATIONS AND CONTROLS OPERATION REMARK Travel down fills with the sprocket (1) side down. If the machine travels down with the sprocket (1) side up, the track tends to become loose, and that can cause skipping pitches. 2. When traveling up a steep hill of more than 15є, set the work equipment to the posture shown in the diagram on the right. TRAVELING DOWNHILL To brake the machine during downhill runs, put the travel lever in the neutral position. This will cause the brake to be automatically applied. ENGINE STOPPED ON SLOPE If the engine stops when traveling uphill, move the all levers to the neutral position, then start the engine again.
PRECAUTIONS ON SLOPES G Do not open or close the sliding door when traveling or operating on slopes. The operating force may change suddenly. Always set the sliding door to the LOCK position. 3-52