Komatsu — RUBBER SHOES

MACHINE OPERATIONS AND CONTROLS OPERATION RUBBER SHOES RUBBER SHOES INFORMATION Rubber shoes have excellent properties that are not found in steel shoes. However, if they are used in the same way as steel shoes, full use cannot be made of their advantages. Be sure to operate without straining the rubber shoes in a way that matches the condition of the jobsite and the nature of the work. Comparison of Rubber Shoes and Metal Shoes Considering the properties of the material used, rubber shoes offer various advantages. However, thier weak point is lack of strength.

Therefore, it is important to understand the advantages of rubber shoes, and to follow the pre- cautions regarding handling and prohibited work. This will extend the life of the rubber shoes and will enable the machine to display the advantages of rubber shoes to the maximum. Before using rubber shoes, always read "USING RUBBER SHOES (PAGE 3-61)". WARRANTY FOR RUBBER SHOES It is important to inspect and maintain the tracks at the correct tension. Furthermore, these shoes must not be used near objects where they are likely to suffer damage, such as the corners of steel plates, U-shaped ditch lin- ers, blocks, on crushed rock or the sharp edges of rocks, iron beams, or scrap iron.

Any damage resulting from the customer's mistaken use of the machine shall not be included in the scope of the warranty. 3-60 Rubber shoes Metal shoes Little vibration Excellent Average Smooth travel (No creaks) Excellent Good Little noise Excellent Average No damage to paved surface Excellent Average Easy to handle Excellent Average Easily damaged Average Excellent Strong drawber pull Excellent Excellent