Komatsu — RUBBER SHOES

MACHINE OPERATIONS AND CONTROLS OPERATION G When traveling in reverse up a slope, do not turn when moving from flat ground onto the slope. If it is necessary to turn on slopes, be sure to turn gradu- ally. G Avoid traveling along the edge of slopes or on rough ground with the track on one side raised (with the machine tilting at an angle of more than approx. 10°) and with the track on the other side on flat ground. To avoid damage to the rubber shoes, travel with the tracks on both sides on flat ground. Mechanism of rubber shoe coming off track 1) When traveling over an obstacle, a gap is formed between the track roller and the rubber shoe. In this condition, the rubber shoe may come off.

2) Furthermore, if the machine travels in reverse, a gap is formed between the track roller, idler, and rubber shoe. 3-62