TRANSPORTATION OPERATION 7. Install shackles to the lifting holes B (2 places) on both ends of the blade, then install the wire ropes. 8. Install shackles to the lifting holes A of the boom, then install the wire ropes. NOTICE G Be sure to use the three brackets. Do not lift the machine with the boom or the upper structure swung. G Be careful not to get the hoses caught. 9. When lifting, set the hanging angle of the wire ropes to 30° to 40°. 10. After the machine leaves the ground, stop lifting once. After the machine is stabilized, lift it up slowly. 3-70