Komatsu — REPLACE RUBBER SHOES

MAINTENANCE PROCEDURE MAINTENANCE REPLACE RUBBER SHOES (Machine equipped with rubber shoe) G Carry out this operation with two workers. The opera- tor must move the machine in accordance with the signals from the other worker. G The track tension is checked with the machine raised, so it is extremely dangerous if the machine comes down by mistake during the inspection. Stop the engine and set the safety lock lever to the LOCK posi- tion to prevent the machine from moving. Never put any part of your body under the track or track frame while measuring, and be extremely careful when tak- ing the measurements.

NOTICE It is possible to replace rubber shoes with steel shoes, but this makes it necessary to remove and adjust the idler cushion, so please contact your Komatsu distributor. G Prepare a grease gun G Prepare a steel pipe 4-36 WARNING