EXPLANATION OF COMPONENTS OPERATION FUEL GAUGE This meter (3) shows the amount of fuel remaining in the fuel tank. During normal operations, the indicator should be in the green range. If the indicator goes down to the E position during operation, there is less than 3.5 l remaining, so check and add fuel. When the starting switch is turned ON, the meter may not indi- cate the actual level for a short time, but this is not an abnor- mality. ENGINE PRE-HEATING MONITOR This monitor lamp(4) indicates the pre-heating time required when starting the engine at an ambient temperature below 0°C (32°F).
The monitor lamp lights when the starting switch is turned to HEAT position and goes off after about 18 seconds to show that the pre-heating is completed. 3-8