Komatsu — CONTROL LEVERS,PEDALS

OPERATION EXPLANATION OF COMPONENTS FUEL CONTROL LEVER This lever (4) is used to control the engine speed and output. (a) Low idling : Push the lever fully. (b) High idling : Pull the lever fully. BLADE CONTROL/VARIABLE GAUGE LEVER NOTICE G This lever is not locked even when the safety lock lever is set to the LOCK position, so be careful not to touch the blade control lever if blade operations are not being carried out. G If the blade is used continuously for more than one hour for digging operations, the water temperature will rise. G Before starting operations, check the setting of the variable gauge/blade selector control lever.

This lever (5) is used to operate the blade and the variable gauge. Direction of operation of control lever (a) (b) Blade operation LOWER RAISE Variable gauge operation CLOSE OPEN 3-13