Komatsu — FUSE

EXPLANATION OF COMPONENTS OPERATION FUSE The fuse box is under the seat. NOTICE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace the fuse with another of the same capacity. FUSE CAPACITIES AND CIRCUIT NAMES BLOCK FUSE If the starting motor does not rotate even when the starting switch is turned to the ON position, block fuse (1) is probably blown, so open the cover on the right side of the machine and check or replace.

REMARK A block fuse is a large fuse wire installed to the circuit where a large-capacity current is flowing. It acts in the same way as a normal fuse to protect the electrical equipment and wiring from burning out under abnormal current. 3-18 Fuse capacity Name of circuit (1) 30 A Room lamp, radio (back-up), starting motor terminal B (stop solenoid) (2) 20 A Alarm buzzer, monitor panel, solenoid, pump adjuster (3) 5 A Wiper, radio, horn, window washer, throttle actuator (4) 30 A Stop solenoid, Stop relay, Timer (5) 5 A Spare fuse