Komatsu — BEFORE STARTING ENGINE

MACHINE OPERATIONS AND CONTROLS OPERATION FASTENING AND REMOVING 1. Adjust the seat so that the operator still feels that there is sufficient knee room when fully depressing the pedal while seated, with the operator's back against the back- rest. 2. After adjusting the seat poaition, sit in the seat. Grip buckle (1) and tongue (2) in each hand and insert tongue (2) into buckle (1). Confirm by pulling the belt that the tongue is securely locked to the buckle. 3. When removing the belt, raise the tip of buckle (1) lever to release it. Fasten belt along your body without kinking it. Adjust the lengths of the belt on the tongue sides.

SEAT BELT ADJUSTMENT Shortening Pull the free end of the belt on either the buckle body or tongue side. Lengthening Pull the belt while holding it at a right angle to the buckle or tongue. 3-28