MACHINE OPERATIONS AND CONTROLS OPERATION SWINGING G The rear of the machine extends outside the track width. Check that the surrounding area is safe before swinging be upper structure. G Check that swing lock monitor is not lighted up. G If the swing control lever is operated quickly, the upper structure will move quickly; if it is operated slowly, the upper structure will move slowly. 1. Operate left work equipment control lever (1) to swing the upper structure. 2. When not using the swing, set left work equipment con- trol lever (1) to the N position. The swing holding brake will be applied.
REMARK G When using the swing on a slope, run the engine at low idling and operate the swing lever extremely slowly. Be particularly careful to avoid sudden movement when the bucket is loaded. G When the bucket is loaded and the left work equipment control lever is operated, the swing holding brake is released, so the upper structure may swing momentarily, but this is not an abnormality. 3-44 WARNING