. OPERATION DETAILED CONTROLS AND GAUGES Controls of Radio it will to the 3 - 58 Method of Setting with Preset Button nd display the frequency on display 5) (manual, auto) to adjust to the o use for recording the frequency 1. 2. 3. 1. Press power switch (1) a (7). Turn the tuning button ( desired frequency. Select a preset button t 3. setting, and keep that but ton pressed for at least 1.5 seconds. The sound will disappear, but when the setting is recorded, the sound will appear and the preset number will appear on display (7) to show that the statio n has been preset. etting, press preset button (6), and After completion of pres and release it within approx. 1 .5 seconds.
The setting will change to the frequency of the br oadcasting station recorded for that button. One AM station an d one FM station can be recorde d for each preset button. Method of Tuning nd display the frequency on display (7). 1. 2. 1. Press power switch (1) a nd display the frequency on display ( 2. Use tuning button (5) to se t to the desired frequency. There are two m ethods for tuning : auto tuning and manual et to the desired frequency. ed, the frequency will move up or down in steps of 9 kHz (AM) or 0.1 MHz (FM). quency station quency station the top or bottom frequency, it automatically continues as follows:
Top J Bottom, or Press tuning button (5) and s Each time the button is press ed, the frequency will move up o r down in s teps of 9 kHz (A M) or 0.1 MHz ( ∨ button: Move to a lower fre ∧ button: Move to a higher fre When the frequency reaches the top or bottom frequency, it a utomaticall y continues as fo Bottom J Top. sed for at least 0.5 seconds. When a broadcasting station is picked u automatically stop. To search for the next station, press tunin g button (5 ) again for at lea ∨ button: Move to a lower fre ∧ button: Move to a higher fre If t his button is pressed duri frequency in use before the b