. OPERATION DETAILED CONTROLS AND GAUGES CIRCUIT BREAKER NOTICE When resetting the circuit breaker, always turn the starting switch OFF first. 3 - 62 If the st arting switch does not turned ON, open the ump box at the front righ work even when the starting switch is grease p inspectio circuit breaker box in t of the machine and side the carry out n. ess current is generated, the circuit breaker cuts off If an exc electrical from dam after it ha If the el remains it is push current to protect elec trical components an d wiring age. To return the circ uit electrical current t the reset button. g normally, the rese o normal t button s been cut off, push in ectric circuit is workin in.
If the reset button po ps out again immedia tely after ed in, it is necessary to check the electric circ REMARK The circ circuits compon current i restoring replace t where large current flo ents and wiring from da ws. It protects the electrical mage caused by an a bnormal n the same way as a no rmal fuse. After repa iring and the location of the ab normality, there is no need to sed again. work even when the starting he breaker. It can be u If the st arting motor does not switch is cut off th turned to the ON positio n, breaker (8), (9) has probably e circuit, so check and restore circuit breaker (8), (9).
If the ele ctrical equipment does not work even when th e fuse is replaced check a , breaker (1) or (11) has probably cut off the c ircuit, so nd restore circuit breake r (1) or (11). Fu No. cap se Circuit name acity (1) 4 0A Fuse box (2) 4 0A Circuit breaker No. 4 - 7 (3) 4 0A Circuit breaker No. 8 - 11