. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING the engine is stopped and may cause serious burns. Wait for the oil through drain plug (P), and check the level 3 - 73 Parts an ediately temperat ure to g o down be fore performing this operation. 1. Ope n the fr ont cove r in the center of the e ngine hood 2. Remove di pstick (G ), and wipe the oil off with a cloth. 3. Full y insert dipstick (G) into filler pi pe (F), t hen r emov e it. 4. The oil leve l should be between th e H and L marks on dipstick (G). If oil level is below th e L mark, add engine oil through fi ller pipe (F). 5. If th e engin aga 6.
If oil level i s correct, securely tight en the o il fille r cap a nd close REMARK When c hecking the oil le vel afte r the en gine ha s bee n operated , wait for at least 15 minute s after stopping the e ngine before c heckin g. is at an angle, make it horizontal before checking. I f the m achine is at an a ngle, m ake it horizont al before checking.