. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Swing Machinery Case, Add Oil WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil and rear machine, and wipe 3 - 77 temperatur e to go down before 1. Remo the oi 2. Fully insert dipstick (G) i nto the filler pipe. 3. When dipstick (G) is pull ed out, if oil level i s between the H and L mar ks of the gauge, oi l level is proper. 4. If the oil level is below th e L mark on dipstick ( G), add e ngine oil thr ough dipstick guid e (F) to the correc t level. After a dding oil, re move air bleed plu g (1) (at the front o f the machine only). 5.
If the oil level exceeds th e H mark on the d ipstick, loosen drain valve (P) to drain the ex 6. After checking the oil le dipstic (G) into th e dipstick guide an d install air bleed plug (1) (a t the front of the