. OPERATION MACHINE OPERATIONS AND CONTROLS Check Electric Wiring CAUTION If fuses are frequently blown or if there are traces of short-circuiting on the electrical wiring, promptly ask your Komatsu the battery cap to clear the breather hole. the bottom of the tank 3 - 80 r to locate the cause and make the Keep the top surface of the battery clean and check the breather hole in the battery cap. If it i s clogged with dirt or dust, wash Check tha t there is no damage to the f uses; that fuses of the specified capacity are used; that there is no disconnect ion or trace of short-circuiting in the electric wiring and no damage to the co vering. Check also that there is no loose ned terminals.
If any, tighten th Moreover, alternator. Be sure to immediate Check Function of Horn ition. he horn sounds immediately. 1. Turn th 2. Press t Note th sound. then pr If the h 1. Turn th e starting switch to the ON pos 2. Press t he horn switch and check that t at if the air tank is empty or the water drain valve in the air tank is at the OP EN position, the horn will not Check that the water drain Valv e is at the CLOSE position, start the engin e and wait for 1 or 2 minutes, ess the horn switch again to ch eck if it sounds. contact your Komatsu distributor for repairs.
orn still does not sound, please contact your Komatsu distributor for repair Drain Water And Sediment from Fuel Tank NOTICE Never use tr ichlene for washing the inside of th Use diesel f uel only. 1. Prepar e a container to catch the fuel t 2. Tank d rain hose (2) out through the ho 3. Open d rain valve (1) at the bottom of t the wa togeth yourse ter and sediment gathered at er with fuel. When doing this, be lf. 4. When only clean fuel comes out, clos