. OPERATION MACHINE OPERATIONS AND CONTROLS Seat Belt WARNING replace the seat belt. the back of the belt. 3 - 84 Before fitting the seat belt, chec k that th ere is no p roblem in the belt mount bracket or m ounting belt. If it is wor n or damaged, Even if no pro blem can be seen i n the b elt, replace the se at belt every 3 years. The date o f manufacture of the b elt is shown on Always wear the seat belt during Fit the seat b elt so that it is not t wisted. Fastening and This seat belt has a wind-in device, s o it is not necessary t o adjust Fastening Seat B elt Hold grip (2) an d pull the belt out from w ind-i n device (1 ), check that the belt is no securely. When doing th locked.
t twisted, then insert tongue (3) into buckle (4) is, pull the belt lightly to check that it is properly tongu 4) Removing Belt Press button ( 5) in buckle (4), a nd rem ove t ongue (3) from buckle (4). The belt is aut omatically wound in, hol d grip (2) and re turn t he belt slowly to wind- in device (1).