Komatsu — WORK EQUIPMENT CONTROLS AND OPERATIONS

. OPERATION MACHINE OPERATIONS AND CONTROLS WORK EQUIPMENT CONTROLS AND OPERATIONS WARNING If the lever is operated when the engine speed has been lowered by the auto-deceleration function, the engine speed will suddenly rise, so operate the levers carefully. 3 - 107 work ol levers. The left work eq lever operates the arm and swing, and the right w ork equipment c ontrol lever operates th e boom and bucket. The movements of the lever and work equip ment are as sho wn in the diagrams o n the right. When the lever s are released, they automatically ret urn to the neutral position an d the work equipment is held in place.

If the work eq uipment control levers are r eturned to the n eutral the machine is stopped, e ven if the fuel c ontrol ULL, the auto-deceleration mechanism will act to gine speed to a mid-range s REMARK With this machi ne, an accumulator is installed in the operating circuit, if less th an 15 seconds has passed since the engine was stopped, when t he starting switch is turned to the ON position even with the engine s topped, it is possible to oper ate the levers to l ower work equipment to the ground. operation can also be used to release the In addition, this remaining press ure in the hydraulic cylinder circuit or to lowe r the boom after the m achine has been loaded on to a trailer.