Komatsu — MAINTENANCE INFORMATION

. MAINTENANCE MAINTENANCE INFORMATION Service Meter Reading Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. Komatsu Genuine Lubricants For lubrication of the machine, use the Komatsu genuine lubricants. Moreover use oil of the specified viscosity according to the ambient temperature. 4 - 2 MAINTENANCE INFORMATION Do not perform any i nspection and maintenance operation that Komatsu Genuine Re placement Parts Use Komatsu genui ne parts specified in the Parts Book as repl Windshield Washer F luid Use automobile win dow washer fluid, and be careful not to let a Fresh and Clean Lub ricants Use clean oil and gr ease.

Also, keep the containers of the oil an d grease clean. Keep foreig n materials awa y from oil and grease. Check Drained Oil an d Used Filter After oil is changed o r filters are replaced, check the old oil and filt ers for metal particles and for eign materials. If large quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out charge, Fuel Strainer If your machine is eq uipped with a fuel strainer, do not remove Welding Instructions e starting switch. e than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near ectors, etc., the instruments may malfunction.

Turn off the engin Do not apply mor Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may malfuncti If a seal or bearin g happens to come between the part being welded and grounding point, change the gro unding point to avoid suc h parts. ea around the work equipment pins or the hydraulic cylinders as the grounding point. Do not use the ar ea around the work equipment pins or the hydraulic cylinders as the gro unding Do not Drop Things I nside Machine When opening ins pection windows or the oil filler port of the tank to carry out inspection, be careful not to drop nuts, bolts, or tool If such things are lead to failure. If s inside the machine.

dropped inside the machine, it may cause d amage and/or malfunction of the machine, a nd will you drop anything inside the machine, alwa ys remove it immediately. r inspection. Do not put unnec essary things in your pockets. Carry only t hings which are necessary fo Dusty Jobsite sty worksites, do as follows: When working at du Check the cloggin g of the air cleaner more frequently with the dust indicator. Clean the air cleaner elemen t more frequently. core frequently to avoid clogging. Clean the radiator core frequently to avoid