Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING Checking clogging monitor (1) of the monitor panel flashes, clean the air cleaner element. 4 - 19 W hen usi ng compressed air, there is dan ger of dirt flying and causing lways w ear protective glasses, dust ma sk, or other protective equipment. W hen rem oving the outer element from th e air cleaner body, it is dangerous t o pull it out by force.

W hen working in high places r where t he foothold is poor, be careful not to fall because of the reaction when pulling out the ou If ai clea r clean n the ai Replacing g element, O-ring ear has passed since installing the element or if air Replacin I c i e f one y leaner mmedia clogging monitor (1) on th tely after the element is cl e monitor panel flashes eaned, replace the outer lement, inner element, and O-ring. REMARK Dus t indica tor (4) gives a guideline for t he cleaning interval for the air c red leaner zone o element. If the yellow piston n the outside circumference on the inside overlaps the of dust indicator (4), it is time to clea n the element.

NOTICE an the air cleaner element until the air cleaner clogging monitor on the monitor panel light up. If the element is D o not cle an the air cleaner element unt il the air cleaner clogging monitor light up. If the element is c f In leaned fr equently before the air cleaner clogging monitor light up, the air c leaner will not be able to display its performance ully, and the cleaning efficiency will also go down. , more dirt stuck to the element will fall inside the inner element.

addition , during the cleaning operation , more dirt stuck to the element wi ll fall inside the inner e If inspecti on, cleaning, or maintenance is carried out with the engine runnin g, dirt will enter the en gine and cause damage to t he engine . Always stop the engine befor e carrying out these operations.