. MAINTENANCE MAINTENANCE PROCEDURE EVERY 250 HOURS MAINTENANCE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 46 Maintenan ce for eve ry 10 hour s servic e shoul d be carrie d out at the The part s and oil are at high tem perature immediately after t he engine is stopped, and may cause serious burns. Wait for the temperat ure to go do wn before starting t he operation. If there i s still pressu re remaini ng inside the case , the oil or plug may fly Loosen t he plug slo wly to relea se the pre Prepare a handle.
Set the TOP ma perpendicular to Using a handle, r the groun emove plu d surfac g (F) an within a range of 10 mm (0 .4 in) be low the bottom ed ge of the plug h If the o il level is l ow, check again. I nstall plug (F), op erate the travel l sprock ever, trave et one turn l in FORWARD or . Perform inspect REVERSE, and ion for Procedure rotate the 2 again 4. If the o il level is l ow, add e ngine oil throug h plug hol e (F) unti the oil overflows from plug hole (F) 5. After c hecking, in stall plug (F).