. MAINTENANCE MAINTENANCE PROCEDURE CLEAN HYDRAULIC TANK STRAINER AND RETURN STRAINER WARNING the 4 - 57 After the engine is s topped, the parts and o il are at high te mperature, so there is danger of burns. Wait for the temperature to g o down before starting the operation. When th e cap of the oil filler port is remove d, oil may spurt out, so turn i t slowly to release the inte rnal pressure, then remove it carefu When re moving cover (1), t he cover may fl y off under the f orce of sprin g (2), so loosen the 4 bolts Clean Hydraulic Tank Str 1. Remo ve cap (F) from th e oil filler port at the top of th tank. 2. Remo take o ut spring ( 2) and strainer (4). 3.
Remo ve any dir t stuck to strainer (4) oil. If s trainer (4) is dam aged, replace it with a new 4. When installing, check that the O-ring at the bottom (4) is not out of place o r twisted, the n coat the sur face of O-ring with grease, inse rt it on to tank protrusion (5), 5. Install cover (1) with bo