. MAINTENANCE MAINTENANCE PROCEDURE REPLACE CORROSION RESISTOR CARTRIDGE WARNING Container to catch drained coolant 4 - 71 If the engine has been operated, all parts will be a t a high temperature , so never try to replace the cartridge immediately aft er stoppi ng the engin Always wait for the en gine and other parts to coo Prepare a filter wr ench for fuel filter elem 1. Tighten 2 valves (1). o catch the coolant under the cartridge. nch, remove cartridge (2). 2. Set a container t o catch the coolant und er the c 3. Using a filter wre nch, remove cartridge ( 4.
Clean the filter h older, coat the packing surface and t hrea d of the new cartridg e with oil, then install it t o the fil ter holder. 5. When installing, tighten until the packin g surfac e contacts the seal surface of t If the filter cartri damaged and th If the filter cartrid packing, so alwa 6. Open valves (1) he filter holder, then tigh ten it up 2/3 o f a t urn. dge is tightened too fa r, the p ackin is will lead to leakage o f coolan ge is too loose, coolant will also leak from the ys tighten to the correct amount. (2 places). 7. After replacing th e cartridge, start the engine and check for any coolant leakage leakage, check i from the filter seal su rface.
If ther e is any any f the cartridge is tighten ed properly.