Komatsu — EVERY 5000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE 4 - 82 5. bottom of the chassis. Remove dra 2) and drain the oil. After dra in plug (P1), then loosen plug (P plugs ( P1) and (P2). Tighten ing torque: 70 ± 10 Nm (7 ± When l yoursel 6. Remov e 4 bolts, then remove cover ( 4). When doing this, cover (4) may fly off because of the force cover p ushed down when removing 7. Hold th strainer 8. Remov e any dirt stuck to strainer (7) , then wash in clean diesel oil or flu shing oil. If strainer (7) is bro ken, replace it with a new part. 9. When i nstalling, insert strainer (7) in to protruding part (8) of the tank, an d assemble.

the specified amount of oil through oil filler port (F). 10. Fill with Check t hat the oil level is within the correct range on the sight gauge. 11. Bleed t he air from the circuit after cl eaning or replacing the filter element o r strainer, or afte r changing the oil.