Komatsu — OPERATION

. ATTACHMENTS AND OPTIONS AUTO-GREASING SYSTEM OPERATION 6 - 14 CHECK BEFORE STARTING OP ERATIONS Check that t here is ample grease i n the grease pail in t he g rease pump inside th e batte ry case. If th e pump has run out of g rease, replace the grea Check that the grease pail is not d ented or deformed. Check that the auto-greasing/grea ever inside the b attery case is at the au to-greasing position (A).

OPERATING PROCEDURE FOR AUTO-GREASING SWITCH To operate t he auto-greasingsyste m, turn the machine starting switch ON, then operate the auto-grea singswitch on the box on the side of the cons ole on the right side of th Operating With Auto-greasing Switch at Auto Positio n When the a uto-greasing switch is s et to the AUTO position , the lamp (green ) lights up and the auto-greasing system starts to machine starting switch is turned ON, if the ng switch is already at the AUTO position, the eration will start immediately. star operate.

When the auto-greasi greasing op eration will start immed Operating With Auto-greasing Switch at Manual Position When the a uto-greasing switch is set to the MANUAL position, the lamp (gr een) lights up and the auto-greasing system s tarts to operate r egardless of the timer. When using the grease gun, set th e auto-greasing switch to the MANUAL p osition. This position i s also used when checking operationof the grease pump and w hen bleeding the air from the grease line. ual operations, the auto-greasing system does not fter using the grease gun, always return the ng switch to the AUTO position. During man operate. A fter using the greas auto-greasi ng switch to the AUTO