. ATTACHMENTS AND OPTIONS AUTO-GREASING SYSTEM EVERY 10 HOURS MAINTENANCE Greasing Points not Including in Auto-greasing System 6 - 24 1. Set t o th e greasing posture below, lowe r th e work equipment to the ground, then stop 2. Usin g a greas e pump, pum p in grease t hrough t he grease 3. After greasing, wipe off any old grease t hat was pushed (1) Arm-Link coupl ing pin (1 pla (2) Arm-Bucket co upling pin (2 (3) Link coupling p in (1 place) (4) Buke t cylinder rod end pin ( 2 places) (5) Bucket-Link co upling pin (1