. SAFETY SAFETY MACHINE OPERATION or slipping to the side, cab facing downhill. 2 - 23 SAFETY RULES FOR TRAVELING ork equipment 40 to 50 at low speed and do not anger that the machine y hit the ground surface ce, or may damage the p slopes, if the machine n, always turn the ossible. If the machine work equipment close ed. Never travel over trongly to one side. ns, always keep a safe her machines to avoid es, check first that the weight of the machine. first with the relevant When trav eling on flat ground, keep the w cm (16 to 20 in) high above the ground. When trav eling on rough ground, travel operate th e steering suddenly. There is d may turn o ver.
The work equipment ma and cause machine o the machine to lose its balan r structures in the area. When trav eling on rough ground or stee is equip ped with auto-deceleratio auto-deceleration switch OFF (cancel). Avoid trav eling over obstacles when p has to trav el over an obstacle, keep the to the gr ound and travel at low spe obstacles which make the machine tilt s When trav eling or carrying out operatio distance f rom people, structures, or ot o contact with them. sing over bridges or structur coming int When pas structure i s strong enough to support the When trav eling on public roads, check authorities and follow their instructions.
When ope rating in tunnels, under bridge s, under electric wires, or other places whe re the height is limited, o perate slowly and be extremely careful not to l et the machine body or work equipment h it anything. TRAVELING ON SLOPES To prevent the machine from tipping over always do as follows. To prevent t always do as Keep the work equipment approx. 20 to the ground . In case of emergency, lowe the groun d immediately to help stop the When trav el up slopes, set the operator's travel dow n slopes, set the operator' Always ch eck the firmness of the groun machine w hen traveling.