. OPERATION DETAILED CONTROLS AND GAUGES Fuel Gauge This meter (8) displays the level of the fuel in the fuel tank. During operations, the indicator should be in the black range. If the indicator enters red range (A) during operations, there is less than 300 liters (79.26 US gal) of fuel remaining in the tank, so check and add fuel. REMARK If the indicator enters red range (B), there is less than 210 liters 3 - 17 (55.48 US gal) of fuel remainin When the indicator is in the red g. range (A) to (B), fuel level monitor (1) lights up red. If the indicator enters the red ra nge, do not carry out operations on steep slopes. There is danger that the engine will stall.
The correct fuel level may not be displayed for a short time when the starting switch is turned ON , but this is not an abnormality. Hydraulic Oil Temperature Gau ge raulic oil temperature. r should be in the black range. This meter (9) displays the hyd During operations, the indicato If the indicator enters red range (A) during operations, the hydraulic oil temperature as gone above 102°C (215.6°F). Stop the engine or run it at low idling and wait fo r the hydraulic oil temperature to go down. REMARK When the indicator is in the temperature is as follows. red range (A), the hydraulic oil han 102°C (215.6°F) han 105°C (221°F) ed range (A) to (B), hydraulic oil up red.
C) when the engine is started, the Red range position (A): More t Red range position (B): More t When the indicator is in the r temperature monitor (1) lights If the indicator is at position ( hydraulic oil temperature is mo re than 25°C (77°F), and hydraulic oil temperature monitor (1) ligh ts up white. In this case, carry out the warming-up operation. For details, see "Warming-up Operation (PAGE 3-91)".