Engine Assembly (0-02) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-82 NOTE: Make sure the transfer tube is aligned with the cyl- inder block suction tube hole when installing the oil pan. Install and tighten the 32 capscrews (M10-1.50 x 25) in the sequence shown. Torque Value: 47 [35 ft-lb] Camshaft and Gear Assembly - Installation Use Lubriplate W 105, or equivalent, to coat the camshaft bushings and camshaft. Install the camshaft installation pilot, Part No. 3376388. Install the expander, Part No. 3376923, (1). Turn the screw inside the expander clockwise to expand the swell plug. Install the arbor sleeve (2) over the expander.
Install the locating pilot extensions (3) to the expander.