Engine Assembly (0-02) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-138 Jacobs W Brake Oil Supply Hose - Installation Install and tighten the oil hose on the oil filter head and Jacobs W Brake connections. Hand Hole Cover (Exhaust Side of Engine) - Installation Use a new gasket and install the cover with four capscrews (M10-1.50 x 20). Torque Value: 47 [35 ft-lb] Dipstick Tube Bracket - Installation Use a new gasket and install the tube bracket with four capscrews (M10-1.50 x 20). Torque Value: 47 [35 ft-lb] Exhaust Manifold - Installation Install two guide pins, Part No. 3376488, into the cylinder head. The gaskets can be installed with either side facing out.
Do not use an adhesive to hold the gaskets in place on the cylinder head.