Cylinder Block (1-01) Section 1 - Cylinder Block - Group 01 M11 Page 1-10 Cylinder liner counter bore Cylinder head deck surface Cup plug bores Main bearing saddles and caps Cylinder Block - Removal from the Rollover Stand The component weighs 23 kg [50 lb] or more. To avoid personal injury, use a hoist or get assistance to lift the component. Install the numbers ‘‘3’’ and ‘‘5’’ main bearing caps and tighten the capscrews. Use the lifting strap, Part No. 3375957, and a hoist to support the cylinder block. Remove the twelve capscrews holding the cylinder block to the rollover stand adapter plate.