Cylinder Block (1-01) Section 1 - Cylinder Block - Group 01 M11 Page 1-12 Dowel Pins - Installation Use a hard plastic hammer to install the following dowel pins: Two cylinder head dowel pins Three cam follower support dowel pins Idler gear ring dowels (1), (2), and (3) Lubricating oil pump dowel pin (4) Cam Follower Studs - Installation Install the seven cam follower studs with two nuts (M10x1.5) tightened together. Torque Value: 34 [25 ft-lb] Remove the two nuts after the studs are torqued.