Camshaft - Cleaning and Inspection for Reuse (1-16) Section 1 - Cylinder Block - Group 01 M11 Page 1-48 Alignment Inspection Install the mandrel and arbor into the connecting rod to be inspected. Install the connecting rod into the fixture. Measure the rod length and bend (alignment). Connecting Rod Length mm in 217.975 MIN 8.5817 218.025 MAX 8.5836 Connecting Rod Alignment mm in Bushing Installed 0.10 MAX 0.004 Twist Inspection Install a feeler gauge between the mandrel and the dial indicator holding plate as shown. Connecting Rod Twist mm in Bushing Installed 0.25 MAX 0.010 Camshaft - Cleaning and Inspection for Reuse (1-16) Cleaning Warning:
When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam will cause serious personal injury. Use solvent or steam clean the camshaft and dry with compressed air.