Lubricating Oil Filter Head (7-05) Section 7 - Lubricating Oil System - Group 07 M11 Page 7-8 Install the dipstick in the dipstick tube. Add enough clean 15W-40 oil to fill the oil pan to the specified oil pan capacity level. Refer to the preceding oil pan capacity table for the oil required. Remove the dipstick and scribe a line across the dipstick. Mark the oil level with an Lubricating Oil Filter Head - Cleaning and Inspection for Reuse (7-05) Cleaning Remove the gaskets from surfaces (1). Remove the filter head mounting gasket material from surface (2). Use solvent to clean the exterior of the filter head. Dry with compressed air.