Engine Disassembly (0-01) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-12 Engine Disassembly (0-01) Engine - Preparation for Cleaning Install caps or tape on all engine openings to prevent moisture and dirt from entering the engine: Protect all electrical components and wiring from the full force of the cleaner spray nozzle. Engine - Cleaning Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam will cause serious personal injury. Steam clean and dry with compressed air. Lubricating Oil - Draining Warning:
Some state and federal agencies in the United States of America have determined that used engine oil can be carcinogenic and can cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolongedcon- tact with used engine oil. The oil pan capacity is 34 Liters [9.0 U.S. gallons]. Remove the oil drain plug from the bottom of the oil pan. Drain the oil into a suitable container. Coolant - Draining Remove the plugs from the following points: Lubricating oil cooler (1) Water pump (2) Drain the coolant into a suitable container.