Section 11 - Exhaust System Exhaust System - General Information M11 Page 11-3 Exhaust System - General Information The exhaust manifold group consists of the exhaust manifolds and the turbocharger mounting studs. Exhaust Manifold - Cleaning and Inspection for Reuse (11-01) Disassembly Use a mallet to remove the two end sections (1) from the center section (2). Cleaning Use Scotch-Brite T , or its equivalent, to remove the carbon from the gasket sealing surfaces (1). Use Scotch-Brite T , or its equivalent, to remove the carbon from the center section sealing surface bores (2). Use a standard stud extractor to remove the four turbo- charger mounting studs from the center section.
Use Scotch-Brite T , or its equivalent, to remove the carbon from the connection surface (1) of both end sections.