Section V - Specifications - Group 18 Component Specifications and Torque Values M11 Page V-3 Component or Assembly (Procedure) Ref.No./Steps Metric U.S. Component Specifications and Torque Values Engine Assembly - Specifications Cylinder Liner Protrusion 0.00 mm MIN 0.000 in 0.13 mm MAX 0.005 in Note: Liner protrusion is measured with Part No. 3823495 Cyliner Liner Clamp Set installed.
Cylinder Liner to Block Clearance 0.25 mm MIN 0.010 in Cylinder Liner Out of Round 0.10 mm MAX 0.004 in Crankshaft End Clearance 0.10 mm MIN 0.004 in 0.56 mm MAX 0.022 in High Oil Pressure Regulator Retainer Plug 8.03 mm MIN 0.316 in 8.53 mm MAX 0.336 in Main Oil Pressure Regulator Spring Free 84.1 mm 3.31 in Length Spring Load at 48.3 mm [1.90 in] 91.1 N MIN 20.50 lbf 94.7 N MAX 21.30 lbf Main Oil Pressure Regulator Retainer Plug 11.1 mm MIN 0.44 in 13.4 mm MAX 0.53 in