Section V - Specifications - Group 18 Component Specifications and Torque Values M11 Page V-7 Component or Assembly (Procedure) Ref.No./Steps Metric U.S. Vibration Damper Face Runout - Measurement 0.28 mm MAX 0.011 in Rocker Lever Side Clearance 0.55 mm MIN 0.022 in Jacobs T Brake Slave Piston Clearance 0.38 mm MIN 0.015 in Injector Adjustment 1. Bottom plunger 2. Loosen adjusting screw 2 flats and torque locknut. Note: Do not use excess force when bottoming plunger. Intake Valve Clearance 0.36 mm MIN 0.014 in Exhaust Valve Clearance 0.69 mm MIN 0.027 in Air Compressor to Accessory Drive Timing Position the air compressor crankshaft timing mark at the 12:00 o’clock position.
Position the accessory drive shaft dowel pin at the 2:00 o’clock position. Alternator Belt Tension Refer to the belt tension chart in this section.