Component Specifications and Torque Values Section V - Specifications - Group 18 Page V-10 M11 Component or Assembly (Procedure) Ref.No./Steps Metric U.S. Camshaft Thrust Plate 47 35 ft-lb Camshaft Rear Cover Plate 47 35 ft-lb Lubricating Oil Pump 41 30 ft-lb Hydraulic Drive Adapter 47 35 ft-lb Hydraulic Drive Cover Plate 27 20 ft-lb Accessory Drive Assembly 47 35 ft-lb Idler Gear Cover Retainer: 61* 45* ft-lb * Plus 60 degrees Cam Follower Support Studs 34 25 ft-lb Note: Install the cam follower support studs with two (M10X1.5) nuts tightened together. Remove the nuts after the studs are tightened.