Section 0 - Engine Disassembly and Assembly - Group 00 Engine Disassembly (0-01) M11 Page 0-39 Crankshaft Front Oil Seal - Removal Remove the six capscrews, the clamping ring (1), the oil seal (3) and dust seal (2) together, and the gasket (4). Front Engine Support Bracket - Removal Remove the six capscrews and bracket. Gear Cover - Removal Six of the gear cover capscrews were removed with the front support bracket. Remove the remaining 14 capscrews and the gear cover. Remove the rectangular seals from the grooves around the mounting surfaces of the gear housing. Idler Gear Assemblies - Removal Three idler gear assemblies are used:
water and lube pump idler gear (1), camshaft idler gear (2), hydraulic pump idler gear (3).