Section 0 - Engine Disassembly and Assembly - Group 00 Engine Assembly (0-02) M11 Page 0-57 Use Lubriplate W 105, or equivalent, to coat the bearings. Crankshaft - Installation The component weighs 23 kg [50 lb] or more. To avoid personal injury, use a hoist or get assistance to lift the component. Use a hoist and nylon lifting sling, Part No. 3375957. Install the sling around the numbers and rod bearing journals. Do not damage or move the bearing shells when the crankshaft is installed. Install the crankshaft. Thrust Bearings, Lower Bearing Shells and Main Bearing Caps - Installation Production thrust bearings, Part No.
3822062, include an interlocking design to make sure the bearings are in- stalled correctly. NOTE: 0.25 mm [0.010 inch] oversize thrust bearings, Part No. 3050589, are available if required. Use Lubriplate W 105, or equivalent, to coat the upper thrust bearings.