TROUBLESHOOTING / Troubleshooting A CAN HARNESS CHECK Check the wiring connections first. Open circuit in CAN harness between MC and ECM. NO Check for continuity in CAN harness between MC and ECM. YES · Key switch: OFF · Refer to “CAN Harness Continuity Check” on T5-6-58. · Key Switch OFF · Refer to “CAN Harness Continuity Check” on T5-6-58. · Key switch: OFF · Refer to “CAN Harness Continuity Check” on T5-6-58. Retry by using Dr. ZX. Check if fault code 11004-2 is displayed. Open circuit in CAN harness between MC and ICF. NO T5-6-54 Check for continuity in CAN harness YES between MC and monitor unit. Check for continuity in CAN harness between YES MC and ICF. Normal. NO