TROUBLESHOOTING / Troubleshooting A CAN HARNESS CHECK (MC FAULT CODE 11910, 11914, 11920) • Check the wiring connections first. T5-6-92 Shorted circuit in CAN YES harness between ground Disconnect all circuit and CAN circuit. connectors of MC, ICF, ECM and monitor unit. YES Check for continuity between ground circuit Check for continuity (MC, ICF, ECM, between power circuit monitor unit) and CAN (MC, ICF, ECM, Check for continuity in circuit. NO monitor unit) and CAN YES CAN harness between · Key switch: OFF circuit. MC and ECM. · Refer to · Key switch: OFF · Key switch:
OFF “Discontinuity Check · Refer to “Discontinuity · Refer to “Continuity between CAN Circuit Check between CAN Check in CAN and Ground Circuit”. Circuit and Power Harness”. Circuit”. Retry by using Dr. ZX. Check if fault code Open circuit in CAN 11004-2 is displayed. NO harness between MC and ECM. Normal. NO Shorted circuit in CAN harness between ground circuit and CAN circuit. Normal. NO Check for continuity between power circuit (MC, ICF, ECM, NO monitor unit) and CAN circuit. Check for continuity in CAN harness between YES MC and ECM.