TROUBLESHOOTING / Troubleshooting B T5-7-6 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Pressure Sensor (Travel) • Monitors travel pilot pressure in order to control auto-idle, idle speed-up, engine speed automatic increase at travel (ZX270-3 class only), slow speed torque increase and travel motor displacement angle controls. • Idle speed-up control Engine speed does not change into idle speed-up speed when traveling. • Auto-idle control Although the machine trav- els, auto-idle is not released. • ECO control Although the machine trav- els, engine speed does not increase.
• Travel HP mode control Travel HP mode control is ineffective. • Operation torque decrease control Operation torque decrease control is ineffective. • Travel torque-up control Travel torque-up control is ineffective. • Travel motor displacement angle control The machine travels at slow speed. • Attachment flow rate control During combined operation of secondary crusher or pri- mary crusher and travel, at- tachment operation speed may become slow. • Travel alarm (optional) control Travel alarm is kept ON. • When the machine travels at idle speed, engine speed is not changed into idle speed-up speed. • Although the machine travels, engine speed is kept at auto-idle speed.
• Although the machine travels, engine speed does not in- crease. • As the machine is kept to travel at slow speed, speed does not change into fast. • During combined operation of attachment and travel, the machine mistracks. • The travel alarm is kept to ring as for the machine equipped with travel alarm (optional).