TROUBLESHOOTING / Troubleshooting B T5-7-8 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Pressure Sensor (Front Attachment) • Monitors front attachment pilot pressure in order to control auto-idle, idle speed-up and engine speed automatic increase at travel (ZX270-3 class only) con- trols. • Idle speed-up control Engine speed does not change into idle speed-up speed when operating front attachment. • Auto-idle control Although the front attach- ment is operated, auto-idle is not released. • ECO control Although the front attach- ment is operated, engine speed does not increase.
• Operation torque decrease control Operation torque decrease control is ineffective. • Travel torque-up control Although the front attach- ment is operated, travel torque-up control is not re- leased. • Travel motor displacement angle control Although the front attach- ment is operated, the ma- chine travels at fast speed. • When the front attachment is operated at idle speed, en- gine speed is not changed into idle speed-up speed. • When the front attachment is operated, engine speed is kept at auto-idle speed. • When the front attachment is operated, engine speed does not increase. • Although the front attachment is operated, the machine travels at fast speed.
Pressure Sensor (Swing) • Monitors swing pilot pressure in order to control arm flow rate and arm regeneration controls. • Arm regeneration control During combined operation of arm roll-in and swing, arm regeneration is reduced. • Swing alarm (optional) con- trol Swing alarm is kept ON. • Arm speed is slow during combined operation of arm roll-in and swing. • The swing alarm is kept to ring when swing alarm is ef- fective as for the machine equipped with swing alarm (optional).