TROUBLESHOOTING / Troubleshooting B T5-7-18 Item Parts Function Symptoms in control system when trouble occurs. Symptoms in machine operation when trouble occurs. Auxiliary Flow Rate Control Solenoid Valve (Optional) • Restricts flow rate to auxiliary spool during combined operation and improves operability. • If auxiliary flow rate control solenoid valve is not activated, pressure at output port becomes 0 MPa (0 kgf/cm2). • High current: If valve is bound fully closed, attachment speed becomes slow during single operation. • Low current: If valve is bound fully open, boom does not raise during 3-combined operation of boom raise.
Auxiliary Flow Combining Solenoid Valve (Optional) • Activates during auxiliary operation and shifts spool in auxiliary flow combining valve. • If auxiliary flow combining solenoid valve is not activated, pressure at output port becomes 0 MPa (0 kgf/cm2) when operating attachment. • Speed does not increase during single operation of attachment. Selector Valve Control Solenoid Valve (Optional) • Activates when attachment “selector valve returning to hydraulic oil tank” is selected and shifts selector valve spool.
• If selector valve control solenoid valve is not activated, pressure at output port becomes 0 MPa (0 kgf/cm2) when attachment “selector valve returning to hydraulic oil tank” is selected. • Breaker stroke becomes few. Accumulator Control So- lenoid Valve (Optional) • Activates when attachment “accumulator ON” is selected and shifts accumulator control valve spool. • If accumulator control solenoid valve is not activated, pressure at output port becomes 0 MPa (0 kgf/cm2) when attachment “accumulator ON” is selected. • When NPK breaker is used, hydraulic pulsation (hose vibration) becomes big.