TROUBLESHOOTING / Troubleshooting B YES Faulty starter, or faulty harness between starter and battery relay. Check if voltage at terminal A in battery relay is 24 V. Check if voltage at terminal #2 of har- ness end of con- nector in starter cut relay is 0 V. YES YES Faulty battery relay. NO Disconnect connector of starter relay 2. Connect terminal S of harness end of con- nector to machine. Check for continuity between terminal #4 of harness end of con- nector in starter cut relay and machine. Shorted circuit in harness between starter cut relay and emergency stop switch. YES NO NO Open circuit in harness between starter cut relay and starter relay 2.
Open circuit in harness between key switch and starter cut relay. NO Connector (Harness end of connector viewed from the open side) Monitor Unit Connector Monitor-A Starter Cut Relay #A7 T183-05-05-001 T183-05-04-003 T5-7-59