TROUBLESHOOTING / Troubleshooting B E-10 Faulty E mode Even if power mode switch is turned to the E mode position, engine speed remains unchanged. (Engine speed does not decrease.) Related MC Fault Code: 11004-2, 11200-3, 11200-4, 11202-3, 11202-4, 11206-3, 11206-4, 11208-3, 11208-4 In case trouble symptoms E-1 to E-9 are recog- nized, perform the troubleshooting of these trou- bles first. The sensors detect the conditions necessary to operate E mode. Therefore, if any of these sen- sors fails, E mode becomes ineffective. Pump 1, 2 control pressure sensors and pump 1, 2 delivery pressure sensors are also engaged in the E mode control.
However, if these sensors fail, other operating functions will be also affected. Refer to the pages for E Mode Control in the SYSTEM / Control System group in the T/M (Op- erational Principle). Check the wiring connections first. NO Faulty power mode switch, or open circuit in harness between power mode switch and MC. Monitor power mode switch. When power mode switch is shifted to E mode, check if display is changed. NO Faulty MC. · Monitor item: E/P/HP mode switch YES NO Faulty corresponding sensor, or open circuit in harness between MC and sensor. Check if fault code 11004-2 is displayed. · Fault code: 11206-3 11206-4: Pump 1 control pressure sensor 11208-3, 11208-4:
Pump 2 control pressure sensor 11200-3 11200-4: Pump 1 delivery pressure sensor 11202-3, 11202-4: Pump 2 delivery pressure sensor YES Refer to fault code 11004 in Troubleshooting A. YES T5-7-76 Check if fault code is displayed.