TROUBLESHOOTING / Troubleshooting B E-13 When attachment mode is selected, engine speed does not decrease. Related MC Fault Code: 11004-2, 11918-2 In case trouble symptoms E-1 to E-11 are recog- nized, perform the troubleshooting of these trou- bles beforehand. Refer to the pages for Attachment Operation Speed Limit Control in the SYSTEM / Control System group in the T/M (Operational Principle). Check the wiring connections first. T5-7-80 Check if fault code YES 11004-2 or 11918-2 is displayed. YES Faulty MC. Check if attachment speed adjustment has been set to “Decrease (-)” in on “Parameter Change” in Dr. ZX. NO Normal (Set to “Decrease NO (-)”.) Normal (Set to “Decrease (-)”.) NO