hitachi — ENGINE SYSTEM TROUBLESHOOTING

TROUBLESHOOTING / Troubleshooting B E-15 Engine is difficult to start at low tempera- ture. (During cold weather or in cold dis- tricts, engine is difficult to start or does not start even if pre-heated.) Related MC Fault Code: None Check if electricity is routed to the glow plugs. Check the glow plugs for any abnormality. The pre-heat system operates only when coolant temperature is below 20 ° C (68 ° F). Measurement of Glow Plug Voltage and Resistance Check the battery. Check the wiring connections first. Disconnect connector of coolant temperature sensor. Check if voltage at glow plug is 20 to 24 V. · Key switch: ON nector connected. · Key switch:

OFF · Before measuring, re- move copper plates connecting each glow plug. Voltage Check Resistance Check Remove the copper plate. Specification: 20 to 24 V T105-07-04-006 Specification: Below 10 Ω T105-07-04-007 T5-7-84 YES Faulty sensor. YES Faulty ECM. Disconnect connector in ECM. Connect terminal #4 of harness end of connector to NO machine. Check if problem is corrected. · Connect to machine from Measure each glow plug the back of connector by resistance. NO Faulty sensor. Measure each glow plug NO resistance.